Home / SR34S 淘汰版方案

SR34S 淘汰版方案

CABINET SERIES · COMPACT HYDRO-COOLING SYSTEM

SR 34-S

Compact hydro-cooling for up to 34 miners.

A fully integrated, factory-built system that houses up to 34 hydro miners, dissipates over 200 kW of heat, and runs at a design PUE below 1.05 — delivered as two plug-and-deploy modules.

SR 34-S hydro-cooling system render
<1.05Design PUE
>200 kWHeat dissipation
34Miner slots in a single cabinet
>200 kWHeat dissipation capacity
<1.05Design PUE
56%Less land than 20-ft container solutions
Flexible Deployment

One system. Two ways to deploy.

The SR 34-S features a split-type structural design that adapts to your site — not the other way around.

01

Indoor Split Configuration

Place the miner cabinet inside your facility with the dry-cooler container outdoors — the right fit where climate control, security, or existing buildings are part of the picture.

  • Miner cabinet deploys inside the facility
  • Dry cooler positioned outdoors
  • Adapts to constrained or existing sites
02

Outdoor All-in-One Configuration

Deploy the complete system outdoors as a single integrated unit — the fastest path from delivery to full operation on open sites and greenfield locations.

  • Complete system outdoors as one unit
  • Fastest route to full commissioning
  • Ideal for open sites and rapid scale-out
System Architecture

Engineered as one system, not assembled from parts

Power distribution, networking, the miner rack, and the coolant distribution unit arrive pre-integrated and pre-tested as a single cabinet.

01 / PDC

Power Distribution

Main breaker 400 A with 34 × 16 A miner breakers. High-reliability design with high-grade copper bar connections throughout.

02 / NETWORK

Network Switch

2 × 24-port Gigabit switches integrated in the cabinet — network-ready from day one.

03 / MINER RACK

Miner Rack

34 high-strength slots on a reinforced frame with all cabling built in — optimized for convenient maintenance.

04 / CDU

Coolant Distribution

PLC cabinet with all-in-one water tank and a 25 m³/h pump. Real-time monitoring and control of operating frequency.

Built-in makeup water tank with real-time level monitoring Circulating filter keeps the medium clean Manual valves for quick isolation during maintenance
Why SR 34-S

A lower cost per deployed megawatt

The compact SR 34-S is built to cut the three biggest line items in small- and mid-scale deployments: shipping, land, and on-site labor.

40%

Lower Transportation Costs

Up to 40% lower shipping cost than a traditional 20-foot container solution — same power capacity, smaller logistics footprint.

56%

Less Land Occupied

At the same power capacity, the SR 34-S occupies up to 56% less land than a 20-foot container deployment — land that stays available for the next expansion phase.

½

Less Work, Less Time

Highly prefabricated modular design dramatically reduces the amount of work and time required on site — from delivery to commissioned operation.

Intelligent Control

A console that watches the system, so your team doesn't have to

The PLC-based Intelligent Control Console keeps the SR 34-S stable around the clock — and gives operators full visibility when it matters.

  • Precise thermostatic control
  • Adaptive flow control
  • Automatic preheating control
  • External cooling system linkage
  • Historical alarms & operation records
  • Historical performance data curves
  • Multi-point fault alarm system
  • Low water level & leak alarms
  • Auto load reduction & recovery on high temp
  • Unified component status overview
  • O&M operation permission groups
  • Indoor & outdoor environment monitoring
SR 34-S · CONTROL CONSOLE STABLE
Coolant Temp32.4 °C
Flow Rate25.0 m³/h
Pump Load68%
09:41:07  OK  Fan array frequency 46.2 Hz — auto-adjusted
09:40:52  OK  Water level nominal — tank 92%
09:40:31  OK  All 34 slots online — load balanced

Illustrative interface. Values shown are representative operating data.

Technical Specifications

SR 34-S at a glance

Full system parameters for capacity, physical dimensions, electrical input, and control.

Capacity & Cooling
Miner capacity34 unitsAntminer S19 / S21 Hydro series
Heat dissipation capacity> 200 kW
Total load210 kWIncluding cooling energy consumption
System energy consumption10 kW
Design PUE< 1.05
Fans2 large-volume fans
Constant-temperature modeVariable-frequency AC fan controlPlus stepwise fan regulation
Physical & Dimensions
System composition2 factory-integrated modulesDry-cooler container ×1 + integrated liquid-cooling power distribution cabinet ×1
Cabinet dimensions (L×W×H)1350 × 800 × 2400 mm53.1 × 31.5 × 94.5 in
Cabinet weight400 kg882 lbs
Dry-cooler container dimensions (L×W×H)2350 × 1350 × 2400 mm92.5 × 53.1 × 94.5 in
Dry-cooler weight800 kg1,764 lbs
Installation methodIndoor split / Outdoor all-in-one
Electrical
Input power3-phase 380–415 V, 50 Hz
Main breaker400 A
Miner breakers16 A × 34
Pump power3.5 kWCDU pump rated 25 m³/h
Network2 × 24-port Gigabit switches
Control & Environment
Control systemPLC control consoleIntelligent Control Console with monitoring & alarms
Ambient operating range−20 °C to 45 °C−4 °F to 113 °F
Evaporation padNot required
CertificationCustom UL / CE supported

Specifications are subject to continuous improvement. Custom configurations available on request.

Applications

Where the SR 34-S performs

Hydro Mining Facilities

High-Density HPC & AI Compute

Energy-Integrated Computing Sites

Remote Sites with Limited Staff

Next Step

Ready to deploy the SR 34-S?

Talk to an engineer about your site, power capacity, and target timeline. We'll help you size the right configuration — and get you a quote fast.

Contact CoolSpace