Home / Explosion-Proof and Tunnel-Boring Chillers

Explosion-Proof and Tunnel-Boring Chillers

COOLING SOLUTION UNITS · SPECIAL-DUTY CHILLERS

Special-Duty Chillers for Harsh Sites

Two purpose-built chiller families for demanding job sites: explosion-proof water chillers and compact units for tunnel-boring machines.

55–2,200 kWExplosion-proof designDual-circuit controlVibration-damped frame
Cool Space explosion-proof chiller
55–2,200kWExplosion-proof range
75–425kWTunnel-boring range
55–2,200kW
Explosion-proof chiller
16–626tons
Explosion-proof chiller
75–425kW
Tunnel-boring unit
21–121tons
Tunnel-boring unit
Product Overview

Cooling that holds up where standard chillers cannot.

Hazardous areas and tunnel-boring machines place very different demands on a chiller. Cool Space builds both families to the project, with the protection, corrosion resistance and compact layout each site requires.

Explosion-proof units serve process areas where ignition risk must be controlled. Tunnel-boring units handle heat, dust and humidity in tight machine spaces.

  • Protection built in — multi-layer safety chain on explosion-proof units
  • Corrosion resistance — materials chosen for salt fog, humidity and chemical exposure
  • Efficient screw compression — strong low-temperature cooling capacity
  • Compact and damped — vibration-damping frame for tunnel-boring units
  • Smart control — fault early warning and automatic control
Explosion-proof chiller, front viewExplosion-proof chiller, side viewTunnel-boring (shield machine) chiller unit
Special-duty chillersSelect a view to explore the units.
Two Families

Choose the unit for your site.

Each family is engineered to the project.

Explosion-proof

Explosion-Proof Chiller

For hazardous areas where electrical and mechanical safety come first.

  • 55–2,200 kW (≈16–626 tons)
  • Explosion-proof design and certification scope per project
  • Multi-layer safety protection chain
  • High-efficiency screw compressor
  • Strong low-temperature cooling
  • Corrosion-resistant, salt-fog tolerant materials
  • Fault early warning and self-diagnosis
Tunnel boring

Tunnel-Boring (Shield Machine) Unit

Compact cooling for the confined, dusty, humid conditions inside a tunnel-boring machine.

  • 75–425 kW (≈21–121 tons)
  • Fast cooling and rapid temperature reduction
  • Multi-directional vibration-damping frame
  • Dual independent control circuits
  • Dust-tolerant for high-dust conditions
  • Compact, narrow-space installation
  • Resists high humidity and chemical corrosion
  • Fully automatic intelligent control
Why Special-Duty

Engineered for the site, not the catalog.

Three reasons teams choose Cool Space for demanding environments.

01

Safety by design

Protection layers, fault early warning and self-diagnosis keep operation predictable in hazardous or remote locations.

02

Built for the environment

Corrosion-resistant materials and sealed, damped construction stand up to salt fog, dust, humidity and vibration.

03

Customized per project

Capacity, circuits, controls and footprint are engineered to your machine or process.

Capacity Range

Where this unit sits in the Cool Space chiller range.

Cooling capacity on a logarithmic scale. The highlighted bar is this product. Select another bar to open its page. Every unit is customized per project.

Magnetic-levitation centrifugal chiller387–3,376 kW · 110–960 tons
Air-source heat pump unit120–1,450 kW · 34–412 tons
Explosion-proof chiller55–2,200 kW · 16–626 tons
Tunnel-boring (shield machine) unit75–425 kW · 21–121 tons
Clean-room air handling unit13–1,273 kW · 4–362 tons
10 kW100 kW1,000 kW4,000 kW
FAQ

Quick answers.

What capacity ranges do these units cover?

Explosion-proof chillers cover 55 to 2,200 kW (about 16–626 tons). Tunnel-boring units cover 75 to 425 kW (about 21–121 tons).

Which explosion-proof standards apply?

The applicable explosion-proof standards and certification scope depend on the site and region. Share your requirements and our team will confirm them for your project.

Which industries use explosion-proof chillers?

Chemical and petrochemical plants, oil and gas facilities, pharmaceutical solvent processing, paint and coating lines, and other areas where flammable vapors or dust are present. Share your site classification and we will confirm the configuration.

Can the tunnel-boring unit be tailored to our machine?

Yes. Dual independent circuits, frame and layout are customized to the machine and its space constraints.

Can the unit be customized?

Yes. Every chiller is built to the project. Capacity, controls, materials and footprint are engineered to your requirements.

Technical Specifications

Special-duty chillers at a glance.

Every unit is engineered to the project. Datasheets and drawings are available on request.

Product family
Explosion-proof chiller · Tunnel-boring (shield machine) unit
Explosion-proof capacity
55–2,200 kW (≈16–626 tons)
Tunnel-boring capacity
75–425 kW (≈21–121 tons)
Compressor
Screw (explosion-proof series)
Control
Fault early warning, self-diagnosis, dual independent circuits (tunnel boring)
Environment
Salt fog, high dust, high humidity, chemical corrosion
Frame
Multi-directional vibration damping (tunnel boring)
Application
Chemical and petrochemical, oil and gas, pharmaceutical process areas, tunnel boring and mining
Customization
Built to project

Tell us about your hazardous-area or tunnel-boring project.

Tell us your load, site conditions and delivery timeline. Our team will return a configuration and quote.